Q32系類固定式、履帶式拋丸消除機

◆護膚品特性 Product features

本三輪式通過式拋丸機適當多優良品種，大中大批量的生產鋁件的表面上去銹或拋丸提升，清除垃圾鋁件都要是否怕結合的單重在150kg接下來的鑄件及熱進行處理件，這個機器既可pc單機運用，又可配線運用. 類屬鑄工自動化設備規模。

電腦智能：將鋁件放到塑料履帶輥子中，作業工作員鍵后“運動”開關按鈕，拋丸室門油路分配器停用，拋丸徹底清除剛開始，履帶向前看運動，鋁件總是地對其進行翻滾，強力拋丸器將拋丸高速公路拋射進正翻滾的鋁件外表面上，鋁件可完全性均地獲得徹底清除。鋼丸可以通過履帶入的溜孔進入到旋螺氣流皮帶推送機，再將鋼丸氣流推送往斗式不斷上升絞車，經斗式不斷上升絞車不斷上升到分離器，被分離后儲存方式五定。拋丸截止后，拋丸室門電腦智能切換，履帶倒置，將鋁件卸出。

人工：該生產設備是巧用高速度轉回的轉子將彈丸拋向履帶內連繼拖動的零部件上，于是到除去工作零部件的意圖。它適于于各家業中的小形鑄件、鍛件、五金沖壓件、齒圈、彈簧片等件的清砂、去銹、去鈍化皮和從表面增幅。該生產設備是全方位的中國大陸外技術工藝，定制聯合開發的新車輛，就是種除去工作利用率好、構成主體工程、嘈音小、高低壓開關柜性好的除去工作生產設備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆物品特別 Product features

1.機器選取了懸臂抽濾式拋丸器，具備有運行壽命短長和節構簡單易行等特別。

2.按照BE型轉移器，具有著優質的轉移成果和生產制造率，對增進茶葉有充分的效應。

3.適用袋式除灰器，煤塵廢氣排放氧濃度達不到國度規范標準規定的規范標準，大山河解決了使用者的工作環鏡。

4.選擇抗刮硅膠履帶，避免了對鋁件的結合及軟組織損傷的情況，削減了產品的噪音污染。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆適用于區域 Applicable scope

      壓鑄件、高精度鑄造鑄件、高精度鑄造鍛件等的請理、光飾。剔除熱治理件、鑄件、鍛件的表面上陽極氧化皮。板彈簧的精煉。鎖固件除銹設備和前治理。

1、參考德國企業一百三五年 末的拋丸機廠家參與國產系列化加工制造。

2、分為直聯強大拋丸器，傳承轉化率好，拋丸量大。

3、風選拆分器、丸砂拆分率高于99%。

4、彈丸包含均勻的，無拋丸盲區。

5、耐用件的使用期限長，修改盡快。

6、裝備低噪音運作。

7、電子商務應用繼電子產品（或PLC）操控，操控柜、聲光報案報案控制系統，PC使用三菱數控系統知名產品品牌，核心原電子元件使用西門子PLC合資經營知名產品品牌基本操作單純、能信。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆常見技藝運作 Main technical parameters