靜電噴涂主設備產品系列

STR-NKP-1型管路表面粉末噴涂器  Spraying machine for piping inner wall

◆適合區間 Applicable scope

符合于圓洞及中大型通風地埋管鋪設的開口處單單從表面處理，它是采取無氣粉末噴涂機輸送管來的各類高壓藝術漆，采用特殊的激光噴嘴，使藝術漆做霧化后隨時構成音箱喇叭形（園椎型、塊實心），均勻分布地噴在通風地埋管鋪設內單單從表面，才能改變通風地埋管鋪設的單單從表面處理。 NKP-1型大部分選主要用于Ф50-Ф300mm的途徑，膩子粉黏度不可以大于80秒（4號福特杯）。假如藝術漆動力粘度遠超80秒，需要加萃取劑調制。NKP-1型根本上不易受到通風管道寬度束縛，但合適不善于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

安轉方框圖 Installation to which